FKX RACING rear trunk brace now available !
  1. Welcome to 9th Gen Civic Forum : 2012 Honda Civic Forums - 9th Generation – General discussion forum for 9th Gen Civic

    Welcome to 9th Gen Civic Forum : 2012 Honda Civic Forums - 9th Generation - a website dedicated to all things 9th Gen Civic.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join 9th Gen Civic today!
     
Page 1 of 7 123 ... LastLast
Results 1 to 10 of 67
Like Tree12Likes

Thread: FKX RACING rear trunk brace now available !

  1. #1
    Platinum Member team3d's Avatar
    Join Date
    Oct 2011
    Location
    los angeles
    Posts
    11,031

    FKX RACING rear trunk brace now available !

    we are proud to announce by end of next week...

    we will soon be start shipping fkx racing rear trunk brace...

    will fit all 2012 & 2013 civic sedan & civic coupe



    Quick reply to this message Reply  

  2. Remove Advertisements
    9th Civic
    Advertisements
     

  3. #2
    Platinum Member Bobshur's Avatar
    Join Date
    Jun 2012
    Location
    Buford,Ga
    Posts
    2,139
    Question #1 will there be detailed instructions on assembly?
    Question #2 will it come with all hardware,including the hole that has to be drilled,will the hole need tapped?
    Question #3 it looks like the rear seat is one piece? Is that out of a 9 th gen?
    Question #4will it come in red anytime soon
    Question # 5 will there be a discount ?

    Like my strut tower,just want to make sure I won't be over my head on this one


    Sent from AutoGuide.com App
    12 si coupe with following mods: HFP aero kit,HFP suspension,HFP floor mats,Eibach sways front and back,Megan Racing front,middle and rear frame braces,SS brake lines all around and SS clutch line,Powder coated gloss black si rims,Michelin sport A3 tires,Billet pro short shifter with bushings and cable bushings,moddication SS shift knob,Alpine INE-S920 nav head unit with xm,Polk pa 660 4 channel amp,Polk db tweeters,Polk Dxi-650 front and back,2 Polk Dxi 10 inch subs,each ran by a alpine 500 watt mono amp set to 300 watts at 4 ohms,sound ordnance sealed box at .67 per 10 inch.alpine rear cam,passport 9500ix perm mount radar detector.Magna flow exhaust cat back,tint 35 fronts,20 rear.k&n drop in,silver star ultras in all 3 lights.Future mods,password jdm tow hook,front strut tower,rear strut brace,maybe getting alpine digital 4 channel 100 rms x4 amp to swap for the Polk.and complete new brakes when Baer releases them. Kitchen Sink.
    Quick reply to this message Reply  

  4. #3
    Platinum Member team3d's Avatar
    Join Date
    Oct 2011
    Location
    los angeles
    Posts
    11,031
    #1 yes, I will post a DIY
    #2 yes, other than a drill and drill bit, you do not need anything else
    #3 the installed photo is my personal civic, 2012 Lx is 1pc, not split
    #4 at the moment, no, just the blue is being offer.


    Sent from AutoGuide.com Free App
    Quick reply to this message Reply  

  5. Remove Advertisements
    9th Civic
    Advertisements
     

  6. #4
    Platinum Member team3d's Avatar
    Join Date
    Oct 2011
    Location
    los angeles
    Posts
    11,031
    Quote Originally Posted by team3d View Post
    #1 yes, I will post a DIY
    #2 yes, other than a drill and drill bit, you do not need anything else
    #3 the installed photo is my personal civic, 2012 Lx is 1pc, not split
    #4 at the moment, no, just the blue is being offer.
    #5 yes, we always offer special discount to 9thgencivic.com members.




    Sent from AutoGuide.com Free App



    Sent from AutoGuide.com Free App
    Quick reply to this message Reply  

  7. #5
    Platinum Member Bobshur's Avatar
    Join Date
    Jun 2012
    Location
    Buford,Ga
    Posts
    2,139
    Cool,I'll be getting one,can't wait to get mine back from PC,really like the quality,toy should have a plate on it representing,or a quality sticker. If you do drop me one,or two so I can put them on both after PC ,thanks for everything!


    Sent from AutoGuide.com App
    12 si coupe with following mods: HFP aero kit,HFP suspension,HFP floor mats,Eibach sways front and back,Megan Racing front,middle and rear frame braces,SS brake lines all around and SS clutch line,Powder coated gloss black si rims,Michelin sport A3 tires,Billet pro short shifter with bushings and cable bushings,moddication SS shift knob,Alpine INE-S920 nav head unit with xm,Polk pa 660 4 channel amp,Polk db tweeters,Polk Dxi-650 front and back,2 Polk Dxi 10 inch subs,each ran by a alpine 500 watt mono amp set to 300 watts at 4 ohms,sound ordnance sealed box at .67 per 10 inch.alpine rear cam,passport 9500ix perm mount radar detector.Magna flow exhaust cat back,tint 35 fronts,20 rear.k&n drop in,silver star ultras in all 3 lights.Future mods,password jdm tow hook,front strut tower,rear strut brace,maybe getting alpine digital 4 channel 100 rms x4 amp to swap for the Polk.and complete new brakes when Baer releases them. Kitchen Sink.
    Quick reply to this message Reply  

  8. #6
    Big Timer!!! Slikk726's Avatar
    Join Date
    Jul 2013
    Location
    Alliston Ontario
    Posts
    170
    when would I be able to get a price of it shipped to L9R 1B7 and does it come in the same red as the fkx strut bar. I want it to match my already installed fkx racing strut bar.
    wildlatino89 likes this.
    2013 Civic Si Sedan SOP

    Mod List- FKX Racing Strut Bar, Hondata Flashpro, Vit Tune,RV6 Catted DP, Tein S-tech Springs + Truhart shocks, Beaks Rear Tie Bar, RBC swap with ZDX tb and PRL Cai. Morimoto 5five 3000k fogs and 2Stroke LED Lows, Nokya Hyper Yellow DRLs

    K24Z7 CREW MEMBER #726 Hidden Content
    Quick reply to this message Reply  

  9. #7
    Platinum Member immajackuup's Avatar
    Join Date
    Jun 2012
    Location
    Houston TX
    Posts
    3,143
    I like!!!
    RobSBP and team3d like this.
    Quick reply to this message Reply  

  10. #8
    Platinum Member team3d's Avatar
    Join Date
    Oct 2011
    Location
    los angeles
    Posts
    11,031
    Quote Originally Posted by Slikk726 View Post
    when would I be able to get a price of it shipped to L9R 1B7 and does it come in the same red as the fkx strut bar. I want it to match my already installed fkx racing strut bar.
    sorry, there is some pricing issue, that is why they couldn't offer them in that special anodized color you see on the strut tower bar. we are working very hard to have everything match, but it will increase the price dramatically...
    Quick reply to this message Reply  

  11. #9
    Platinum Member Bobshur's Avatar
    Join Date
    Jun 2012
    Location
    Buford,Ga
    Posts
    2,139
    To save money I'd take it in raw metal......


    Sent from AutoGuide.com App
    Nom Nom likes this.
    12 si coupe with following mods: HFP aero kit,HFP suspension,HFP floor mats,Eibach sways front and back,Megan Racing front,middle and rear frame braces,SS brake lines all around and SS clutch line,Powder coated gloss black si rims,Michelin sport A3 tires,Billet pro short shifter with bushings and cable bushings,moddication SS shift knob,Alpine INE-S920 nav head unit with xm,Polk pa 660 4 channel amp,Polk db tweeters,Polk Dxi-650 front and back,2 Polk Dxi 10 inch subs,each ran by a alpine 500 watt mono amp set to 300 watts at 4 ohms,sound ordnance sealed box at .67 per 10 inch.alpine rear cam,passport 9500ix perm mount radar detector.Magna flow exhaust cat back,tint 35 fronts,20 rear.k&n drop in,silver star ultras in all 3 lights.Future mods,password jdm tow hook,front strut tower,rear strut brace,maybe getting alpine digital 4 channel 100 rms x4 amp to swap for the Polk.and complete new brakes when Baer releases them. Kitchen Sink.
    Quick reply to this message Reply  

  12. #10
    Platinum Member Bobshur's Avatar
    Join Date
    Jun 2012
    Location
    Buford,Ga
    Posts
    2,139
    The rear looks like its metal? Kinda hard to anodize metal,or is it aluminum?


    Sent from AutoGuide.com App
    12 si coupe with following mods: HFP aero kit,HFP suspension,HFP floor mats,Eibach sways front and back,Megan Racing front,middle and rear frame braces,SS brake lines all around and SS clutch line,Powder coated gloss black si rims,Michelin sport A3 tires,Billet pro short shifter with bushings and cable bushings,moddication SS shift knob,Alpine INE-S920 nav head unit with xm,Polk pa 660 4 channel amp,Polk db tweeters,Polk Dxi-650 front and back,2 Polk Dxi 10 inch subs,each ran by a alpine 500 watt mono amp set to 300 watts at 4 ohms,sound ordnance sealed box at .67 per 10 inch.alpine rear cam,passport 9500ix perm mount radar detector.Magna flow exhaust cat back,tint 35 fronts,20 rear.k&n drop in,silver star ultras in all 3 lights.Future mods,password jdm tow hook,front strut tower,rear strut brace,maybe getting alpine digital 4 channel 100 rms x4 amp to swap for the Polk.and complete new brakes when Baer releases them. Kitchen Sink.
    Quick reply to this message Reply  

Page 1 of 7 123 ... LastLast

Quick Reply Quick Reply

Register Now

Please select your insurance company (Optional)

Similar Threads

  1. Replies: 612
    Last Post: 05-22-2018, 10:04 PM
  2. FKX RACING rear trunk brace photo !!
    By team3d in forum Suspension & Brakes
    Replies: 97
    Last Post: 04-11-2017, 06:20 PM
  3. FKX RACING struct tower bar new colors questions ?
    By team3d in forum Suspension & Brakes
    Replies: 12
    Last Post: 08-26-2013, 02:35 AM
  4. Replies: 9
    Last Post: 02-03-2012, 12:52 AM

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.2