I just want to know if anyone is running 300whp with fbo? Parts on the car:
3” Skunk2 Catless DP
3” Ktuned Catback
RBC manifold (ported)
Ktuned Fuel Rail
Pro tune with 230whp at the moment.
Parts I have to install:
Built k20a3 Head
Started installing my RBC manifold and ran into a few problems that I’m hoping someone can shed some light on.
First off, the MAF sensor for my throttle body doesn’t reach anymore and was wondering if anyone had the same issue and found a simple solution. I tried following the...
I just need some more knowledge I have had my 2012 lx civic for a while wondering how much I should start saving and if anyone could help me out a bit on what to get and where to get not trying to push ridiculous power but looking to get around the high 100s and or 200s the right way (San...
I figured I might as well start a build thread now that things are actually moving along. Hopefully they'll keep moving along as they are now:wigglesmiley:
50% Tint Front
20% Tint Rear
Civic badge removed
2500k Nokya Yellow High Beam/DRL
6000k DDM Tuning 35w HID kit
We were lucky to be able to find the last white 4 door Civic SI on the West coast. Some of you may have seen us making some nice power with our K24z3 2009 Acura TSX and wanted to change for something lighter and more fun. Enjoy the pictures and what we have in store for the car.
So the Kraftwerks kit is still in coming soon status. In the mean time what do you think is the best way to prep for a supercharger?
These are a necessity:
Supercharger kit (w/ intercooler, injectors, piping, manifold)
Clutch & flywheel
These can be installed before...
Well, I've only had my car for a little over 3 months and I really haven't done much, but like most, I plan to so I figured I'd make a build thread, then add to it as I continue modding.
Here's what I've done so far
LED Map/Dome Lights & License Plate
Red LED Glow Kit
Red J’s Racing...
Axion Industries 1320 Turbo build
Just wanted to start the build here and share some pictures of the new purchase. We will be going turbo on the car hopefully this year just not sure on which kit but leaning towards the Full Race EFR kit and then its track time...Stay tuned for all the updates
I'm going to go ahead and start a build thread. I currently don't have much to show off but within the next month I will fill this bad boy up with a few things. Be patient with me & stay tuned for a few goodies!I bought the car on 7-2-12. My best friend works at Don Jacobs Honda here in...
Allright so here's a little BG on me before starting the build thread.
#1 I'm a broke 22 y/o college student, lol
Seriously, i bought my car in August 2012, SOP Si, with my dads help.
My previous car was a 2001 wrangler 4.0 that did 10 MPG. Since i was starting culinary school and round trip...
Figured I'd start a thread.. No pics ATM, but I do have a dyno sheet from today
I do all my own work and tuning
Mods so far
3.5 inch cold air intake
RBC intake manifold
Supertech valve springs and TI retainers.
I had 1 rocker arm bust, so that has been replaced...
This is the second fiberglass box I have built, and I must say, it came out better than the last. I'm going to give you guys a quick run down on the build since there are tons of other DIY's online for fiberglass box builds, but this will be specific to mine and the 12 EX Civic.Supplies needed...
Well, trying to move some buddies to the site that really matters :D
So i decided to start my own thread!!! Most of you guys already know my mods, but i think it could be cool i could keep ou updated on my incoming parts and stuff!!
Im Michel, im 22 from Quebec, Canada...at first the car...
12 Civic EX
Only accessories off the lot were trunk liner and splash guards.
First mod was debadge dealership stickers. Second was led bulbs in done lights, trunk, and license plate mount.
Next, Eibach pro kit springs.
And most recently, deck lid spoiler.
Sent from my iPhone using...