9th Gen Civic Forum banner


  1. Exhausts and Downpipes
    Hello community I recently just purchased my 2014 Honda Civic ex as my first car and looked straight into mods for it. I’m having trouble finding catback exhausts that are for my model and I’m wondering if the 2014 Honda Civic si catback exhausts would fit into my 2014 Honda Civic ex. Thanks
  2. Suspension
    So I installed BC Coilovers on my car about a year and half a ago. I just recently got 20mm spacers. When i got them installed at work and went to adjust the ride height the left side kept sitting lower than the right. We even adjusted the left side collar to compensate and it still sits lower...
  3. Mechanical Problems & Technical Chat
    Hey everyone, I recently bought a used Buddy Club downpipe. Upon installation, I saw the flange for the downpipe simply does not line up with the OEM Catback. When two bolt holes are aligned, the other doesn't. Has anyone else had this problem? Anyone have suggestions? I have gotten it to work...
  4. Suspension & Brakes
    Does anyone know if the Buddy Club N+ Coils from a 2012 Si Coupe will fit onto a 2012 Non-Si EX Sedan? Thank you :)
  5. Wheels and Tires
    Hi there, I have a 2012 Civic Si Sedan with Eibach Pro-kit (lowered ~1.5") I have been offered an awesome deal on a set of Volk TE37s (18x8.5 with +30mm offset) The tires are 225/40/18 I know for a fact that 18x8.5 rims with a +45mm offset with the exact same size tires will fit on my car...
  6. Wheels and Tires
    What Rim specs for RPF1s should I run on my 9th gen civic sedan LX? I am lowered on 8th gen skunk 2 springs some where in the 2-3 inch drop range. What I know: I want 17 inch rims. Bolt pattern is 5x114.3 I want to run wider than OEM width. So 8, 8.5, 9? I don't want spokes or rim to stick...
  7. Wheels and Tires
    I found a set of GPs I like on Craigslist unused in box for $1600. I don't know much about fitment so I'll ask you guys. 18x7.5 +48 offset. Bolt pattern is 5x114, any reason they wouldn't work on my EX? Sent from AutoGuide.com Free App
  8. Wheels and Tires
    I am going to be purchasing the MB Battle wheels for my 2012 civic si and I was wondering whats the max size that it can fit without rubbing? I was looking at a 18x8 with 30mm offset but If I can go bigger like an 18x9 with a 30mm or something that would be awesome too! I was also gonna run a...
  9. Wheels and Tires
    Hey everyone, so I have been wondering for the longest time, will the 18x10 +25 fit into my Civic DX Sedan? Will it be able to fit if I did some fender work? If not, I was also just thinking of getting the 18x8.5 +25 on. I would go down to 17 in. but they are way too thin (17x7). The only reason...
  10. Wheels and Tires
    Hey guys, first time civic buyer/owner currently in the process of buying a 9th gen civic. Based in Australia so be buying a VTI-S, 1.8L I-vtec over here looking to fit some JDM rims. if I was to fit staggered offset 18's, what sort of fitment and offset/width is doable on the hatchbacks...
  11. Sedan
    I am thinking about buying this emblem: Amazon.com: JDM Red H Front Emblem 06 -12 Civic 4 Door Si Fa5 New: Home Improvement Does anyone have any experience with these? It is OE but I don't know if it will fit the 2012 Si. Has anyone bought these? I would suspect it is better quality that...
  12. Wheels and Tires
    18x8.5 +45 offset, 225/40/18 tires H&R 1.5" drop would this set up work on my si coupe?
  13. Suspension & Brakes
    Does anybody know where I can buy brake caliper covers for my 12 SI, MGP does not have them for the 12 SI yet, Thanks in advance:)
  14. Si Only
    if you have a 2012 Civic Si and live in the SoCal area around the Montebello, El Monte, West covina, or surrounding Areas preferred so that way you dont drive so far. If you have one let me know so that way I can give you information for a company looking for this car for test fitment for an...
  15. Appearance and Body Modifications
    Foreword by DWils: This thread is for all JDM-type emblems for the 2012+ Civics. This includes sedans and coupes (sedans and coupes use different part numbers and will not fit each other because they are different sizes), different colors (red, black, yellow, white, etc.), real vs knockoffs...
  16. Suspension & Brakes
    Well for the 2012 Honda Civic LX... Just turned in my car to Eibach this morning so that they can measure and test new springs... According to them the springs for the 2011 models don't fit anymore and they have to make a whole new set... So I'm glad I was able to help. Not sure when they will...
  17. Si Only
    With my older Civic, i found Spoon Sports and T1R to be my top favorites for performance. I used some Injen parts in the past, but i ended up selling them within weeks of buying it. What are your favorite aftermarket performance brands?