Search Results for ‘heavy’

Heavy or light shift knob, why? Please post pics of your shift knob and explain why you chose to go heavy or light.

Due to the fender bender I got, which led me to tearing the front end apart (just happens to be on driver side where it's to firewall towards under dash fuse box area)... Which explains why I started the hail damage repair process, since the car was in hospital mode anyways...

Due to the fender bender I got, which led me to tearing the front end apart (just happens to be on driver side where it's to firewall towards under dash fuse box area)... Which explains why I started the hail damage repair process, since the car was in hospital mode anyways...

Ok. So here is my DIY on how to remove the cowl and the various components to gain access to the back of the Si engine to remove the valve cover, top O2 sensor and the downpipe. I do not take responsibility if you damage your car in attempting to reproduce this procedure. Always take your time...

Hey everyone, I've been looking and referring to this site for quite some time now.. I haven't gotten around to posting much so I figured I'd start with this. I have a red Si coupe non-navigation. I plan to get an intake and exhaust this coming summer, followed by suspension and tinting the...

My Lx 18inch Hfp wheels 8thgen Si Axleback Foglight upgrade 12 Si grill upgrade Tinted front windshield strip 5% Tinted 35% all around...had to take my fronts off :( 12 Si spoiler upgrade Plastidip rear emblem Plastidip lower rear bumper 9thgencivic.com sticker Hids Plastidip civic door sills...

Disclaimer 9thgencivic.com may or may not endorse various DIY projects, all DIY projects are purely "at your own risk". If you are at all uncomfortable or inexperienced working on vehicles (especially electronics and mechanical), please reconsider doing the job yourself. It is possible on any...

Okay so it took me 3 weeks to do this with the help of pinaygirlcassy and CivicMX and a lot of other ppl. First before I tell you how to do it. You gonna BLOW YOUR AC FUSE AND MIRROR POWER CONTROL. Unless you change the following fuse to 10 or maybe 15. I didnt try it yet cus my AC fuse kept...

So one of the first things I set out to do when I got my Civic a month ago was to do some easy and relatively inexpensive add-ons. I hesitate to call them mods because they're nothing special, really, but they step it up a notch to me anyway. First thought was to switch out as many bulbs as I...

hello everyone, before *attempting* this DIY (at your own risk) you must have already completely the “ DIY: Front Sway Bar Removal - (warning picture heavy) “. The reason for removing the front sway bar is that 8th generation civics did not come with a factory front sway bar, therefore the...

The purpose of removing the front sway bar on your 9th gen civic: - 8th generation coilovers do in fact fit out cars. For the rear, it is already known that you must order 8th gen rear rubber isolators for the springs because the 9th gen top hats and springs are smaller. This will allow for a...

2012 Honda Civic EX w/18" Niche Spa We had a local dealer bring us a new Civic 4DR for a set of wheels for the showroom display. Just thought I would share:wigglesmiley: Wheel info: Niche Spa 18x8 +35 Tire info: Falken Ziex ZE912 225/45/18