9th Gen Civic Forum banner
rbc
1-20 of 28 Results
  1. Mechanical Problems & Technical Chat
    Hey guys, I did an rbc swap not too long ago and im getting tuned, the tuner is basically done and when im trying to do pulls for the last datalog its stopping at 6500 rpm. He said its something mechanical does anyone know what could be the issue? Thank you Motor mods: RBC (8th gen) 1000cc...
  2. Intakes and TB Spacers
    Hey everyone, Started installing my RBC manifold and ran into a few problems that I’m hoping someone can shed some light on. First off, the MAF sensor for my throttle body doesn’t reach anymore and was wondering if anyone had the same issue and found a simple solution. I tried following the...
  3. Engine, Engine Swaps, Pulleys, Injectors
    Sup y’all I recently got an RBC and I got everything but the injectors. I’ve read that you can install stock injectors and the car should run fine but if you vtec the f*** out of it the motor will be stressed. So I did a bit of research found that the rdx injectors go well with the RBC. Now if I...
  4. For Sale Section
    Hey Everyone, I will soon have available all of the items mentioned in the title of the post: Progress Adjustable Sway Bar, Hondata Flashpro w/ Bluetooth, RV6 Catted Downpipe, PRL RBC Adapter Kit and a Skunk2 Cold Air Intake. The parts are coming off of a car that has 43,000 miles on it...
  5. ECU Tuning
    So I bought a 2012 Civic Si about 9 months ago.(in 2015) I absolutely love the car! However when i bought it, it already had a few modifications. I had no idea what they were at the time, nor did the dealership that sold it to me, other than (it looks like an aftermarket intake)...so whatever...
  6. Si Only
    I've been reading around the forums lately hoping to find an answer to my question. People have been saying that the skunk2 CAI (8th Gen) will fit the RBC intake on the 2012 Civic Si?? I want to be 100% certain before I go ahead and buy the kit and stuff.
  7. Mechanical Problems & Technical Chat
    Hey guys, gotta reach out for some help here. I just got PRL kit installed with RBC and ZDX TB. It was tuned to 224hp + 191 torque, sounded good on the dyno, too. As soon as I take it out, after winding out a couple gears to see what my mods have got me, i was turning around and as I...
  8. Intakes and TB Spacers
    I just put the prl rbc manifold on and I know this sounds weird but my heater won't work on defrost?? And also the car feels like it has no balls at all. Also at about 45-50mph im feeling a hesitation. Now I already have a p0171 which is a bank 1 system to lean but I had the same code after I...
  9. Intakes and TB Spacers
    I've searched the forum high and low for anyone who had my ideal set up and couldn't find anyone with the lay out I want, so here goes. I have the ART SRI and the P2R TBS. I want to do the Rbc but without giving up the art SRI. in order for me to do this I know I need the PRL throttle body...
    rbc
  10. Intakes and TB Spacers
    Today I put the rbc with Injen kit with prl. I have a complete exhaust Ultimate Racing when I mount the prl with rbc and Injen kit. the vtec kicks but the car feels slow any ideas will be appreciated
  11. Intakes and TB Spacers
    Should I be using something else other than the stock intake tube? or will this be ok?
  12. Intakes and TB Spacers
    this is a new one for us here at kphonix and we like taking on something different. the new 9th gen SI civic is the new platform from honda with a completely redesigned k series motor.starting with bigger displacement,intake and exhaust flow pattern,cam profiling etc.so we had a customer come to...
  13. Intakes and TB Spacers
    last night installed my rbc plus 70mm tb everything went well, even rigged the stock intake to work for the time being. but in the end we had a coolant leak from the gasket. the manifold was machined correctly everything lined up perfect. so we are thinking that the gasket just isnt sealing...
  14. Intakes and TB Spacers
    If you're considering the RBC upgrade and currently use the Takeda/Greddy Intake, here's a hook up solution I found. After the install I used a universal Flex-pipe and Spectre 3" Coupler that can be found at your O'reily/Autozone etc. This was my temporary fix until I determined a better fit...
  15. Intakes and TB Spacers
    I have the complete PRL RBC Manifold Intake Kit w/ZDX TB on order and I am asking if anyone knows the compatibility between Injen CAI and the new setup. I am getting the impression that I may need to bridge a gap between the two. Anyone know what it is? I am prepared to order from Intakes.com if...
  16. Intakes and TB Spacers
    Custom 3.5inch intake for our cars along with the battery tray for proper fitment. This is for RBC users 365$ -intake 130$ -battery tray Contact randy at rstech for more info RSTECH-RACING :: Home
  17. Exhausts and Downpipes
    Here you go guys enjoy...
  18. Intakes and TB Spacers
    I've been thinking of a way to get around using the factory flex intake hose with the Injen "pretzel" and i figured id try a true CAI from an 8th since im running an 8th intake. it was quite a bit more work than installing the Injen but it was really worth it. my car has a lot mot=re power now...
  19. Exhausts and Downpipes
    Well here is it, I'm sure you guys will need comparison, but believe me its LOUD! but quiet at part throttle and while cruising with a slight whistle during part throttle acceleration. The window was cracked during the making of this short clip. 100% 0%
  20. Intakes and TB Spacers
    Alright so right now I have the ART SRI and Im looking to purchase the RBC Manifold aswell as the ZDX throttle body. I understand that in order for this set up to work you have to buy extra tubing. I am curious as to which tubing you have to buy and how to do it? Any takers?
1-20 of 28 Results
Top