Does anyone have a detailed instruction or any tips on how to remove this finisher so I can wrap under it? I looked under the trunk liner but im confused on which plugs go to this piece and how to undo them.
I am about to install an aftermarket downpipe and noticed the top o2 sensor has a shroud around it which makes using a thin walled o2 socket necessary.
Is there a certain one you used that worked for this application?
I am now a proud owner of a 2013 Civic Coupe and not even a week of owning the car a guy backed into me..... Nothing major just a super annoying the majority of the damage was to the plastic bumper grille. So i purchased the grille myself and plan on removing the bumper to install it and throw...
Hey guys. Does anyone know how to remove that piece above the license plate (on the trunk) that houses the light fixture? It's also the piece that the rear end 'H' emblem is mounted to (shown in the pic below). Any help would be greatly appreciated. Thanks!
just wanna ask if someone in the forum knows how to remove the molding (chrome) of the front grille of the sedan? im thinking of replacing it with the black one (si grille) but just the mold, thanks (btw does it fit the regular grille?)
DIY: Brake Drum Rust Removal!
[No sanding or scrubbing!]
- 1 gal. of Metal Rescue (I got mine at Home Depot).
- A bucket with a lid.
(No gloves needed)
1. After you jack the car up, put it on stands, etc... you should
be able to easily pull the drums off. Put a plastic bag or rag...
Okay so i some douch bag decided to hit my driver side mirror housing and leave. So i was going to buy a new housing my question is how do i remove the old one? Please help it would be much appreciated.
DIY: Door Panel Removal on DX/LX/EX Sedan
Didn't see any guides for an non-si door removal. Hope this will help for anyone who needs to do this! Step 1. Release the locking tab and pull out the plastic piece inside the door handle. Remove the screw underneath. 2. Pry the entire switch...
Ok. So here is my DIY on how to remove the cowl and the various components to gain access to the back of the Si engine to remove the valve cover, top O2 sensor and the downpipe. I do not take responsibility if you damage your car in attempting to reproduce this procedure. Always take your time...
I am planning on installing a downpipe within two months. I would really appreciate a DIY and I'm sure others would too on how to remove the cowl. I have already spent hours installing my exhaust and intake. I would really appreciate some help with how to remove the cowl.
Thanks and have a nice...
I was just wondering how to remove the stock CD player in a civic lx model it looks as if it would just pop out easily. My other question is where can you get a new CD player mounting bracket and wiring harness at? Any help will be much appreciated.
how do you remove the H emblems without breaking them? they look like they will break if i try to take them off. i wanna take them off to black them out and paint some of my grill.
thanks in advance guys
Decal and Pinstripe removal, advice...
Just wanted some advice on removing dealer decal and pinstripe from my RR 2012 Civic Si sedan.
Step one - remove the stickers/pinstripe
Step two - Googone
Step three - Meguilar's Ultimate quik Wax
Is this the safest for my clear coat and paint finish...
This piece is removable, separate from the bumper. If you've seen Bisimoto's '12 Si, all he did to the bumper was remove the black bar.
I'm curious is companies will make custom inserts so change up the front bumper since this piece is removable.
Just curious Im low on cash do to insurance purposes and really like to make my car growl. Eventually I do plan on bringing it to do custom down pipe and exhaust but for now maybe I can just remove the resonator?
Sent from my SGH-I747M using AutoGuide.Com Free App
I am confused by some of the threads on here about disconnecting the battery...
I read in a few places that you need a code before your car will restart??????
And a few mother minor issues about putting codes in your NAV because of the RESET or something?
I was going to disconnect and remove the...