9th Gen Civic Forum banner
1-18 of 24 Results
  1. Forced Induction And Nitrous
    Hi just joined I would like to turbo my 2013 coupe si soon and wondering what the best turbo kits are and if I can put a sidewinder turbo manifold on and were i would be able to get it thanks:)
  2. Forced Induction And Nitrous
    Hello. Been looking into getting some sort of forced induction into my 12’ si coupe. I’ve currently got invidia Q300 cat back, skunk2 cold air intake, Skunk2 intake manifold, and Ktuned Catless downpipe. (On KtunerV2) I want power but nothing insane, looking at anywhere between 350-400 would be...
  3. Forced Induction And Nitrous
    Hey everyone! New member here, recently boosted the 9th gen civic si and after a few weeks in now getting a “teapot boiling” sound while under wide open throttle. Boost levels are still good but the noise is only getting worse. What do you suggest?
  4. Forced Induction And Nitrous
    I’m hoping that with 9th gen civic being mainstream for a while, there are streamlined turbo kits and tuning options. What are they? What problems have occurred with your own R18 turbo civics? Avoidable? Inevitable? I just paid off the civic, was going to upgrade the car, but figured I’d have...
  5. Performance
    Could I buy a PRL hot parts kit with no turbo and just put in a cheap t3 turbo and run that, for what I want to do I just want 300 ish horsepower. I would need to buy a turbo, a BOV, an intake and that would be it right. I don't want to buy an 850 dollar journal bearing turbo good for 650...
  6. 9th Gen Civic General Chat
    Hello guys I was just wondering what exhaust everyone is running with turbo. I’m planning on boosting soon and I want something that is not too loud. Please send turbo exhaust clips. I really want to hear what a turbo with ktuned exhaust sounds like.
  7. Build Section
    Hello all, I decided to undertake the task of boosting a 2013 Honda Civic EX R18 (Auto Non-CVT) daily driver. I drive ~80 miles daily and wanted to add a bit more power to this great engine. After speaking to their sales/engineer staff in regards to fitment to the 9th gen R18s, I'll be going...
  8. New Member Introductions
    Hey everyone. I have a 2013 si sedan. I keep researching how much it would cost to boost the car, and cannot seem to find some solid answers online anywhere. Why are people so afraid to disclose how much they paid for their setup? I think its weird. If there are posts that exist here where...
  9. Build Section
    So I'm some what new to these forums as a member and I'd figure I'd show what I have to represent some power numbers that I haven't seen so far. I'm running the PRL Stage 2 kit with a PTE 5862 JB set up. I am on E85 but I am running the stock intake manifold. I haven't found that mix on here yet...
  10. Forced Induction And Nitrous
    Hi all, I've been browsing and shopping and researching for quite awhile now, and am in the process of saving for and picking a turbo kit for my car. I don't know much about working on my own car, and as it's my daily driver and I don't want to destroy it, I'd likely have someone put it in for...
  11. Forced Induction And Nitrous
    Hey everyone, Starting off, I already understand that a non-intercooled kit will not be able to run as much boost and thus will not be able to put out as much power as a comparable intercooled kit. My question is, on a proper tune on low boost (~5-6psi), is a non-intercooled kit just as safe...
  12. 9th Gen Civic Site News
    Read more about The New Honda Civic 1.5T is Faster Than the Old Civic Si at AutoGuide.com.
  13. Forced Induction And Nitrous
    Hey guys , I'm in the process of putting my turbo setup together for my fb6 and I have really tried to search for other brands that sell "drop in" fuel pumps ( and yes i tried searching forums " maybe not hard enough " ) but can someone please chime in and let me know if anything other than...
  14. Forced Induction And Nitrous
    I've been very seriously considering going boosted for quite some time now (the 205hp just isn't enough anymore and will probably go Cte if I do). After looking through countless threads I've seen a trend that many people go boosted (regardless of SC or turbo, cte or kraftwerks or FR or PRL...
  15. Forced Induction And Nitrous
    K24 - 500 hp turbo / super charger combo Can't wait to see the specifics on this set-up. Rezvani Unleashes The Beast, A Dressed Ariel Atom With A 500HP Honda Civic Si Engine [w/Video] Rezvani Motors - Home of the Rezvani Beast™
  16. 9th Gen Civic General Chat
    2016+ Honda Civic & Civic Type R Forum this is how im ordering mine lol...
  17. Forced Induction And Nitrous
    Good Morning, This is the plan for my build, the goal for the first year is to be at around 300whp. The turbo I bought is a precision 6262 Journal Bearing with .63AR (i know its a big turbo for only 300whp but i have further plans and got it for a good deal). I am planning on getting the...
  18. Forced Induction And Nitrous
    just installed new wiseco pistons and molnar rods. First time I heard of molnar rods, but so far so good. The guy i purchased them from said they are made by K1. Running 10.2:1 compression for my turbo set up. Any one hear about Molnar rods before?
1-18 of 24 Results