9th Gen Civic Forum banner
Status
Not open for further replies.
1 - 20 of 31 Posts

·
Registered
2015 Civic Si Sedan
Joined
·
18 Posts
Discussion Starter · #1 · (Edited)
I respond in under 12 hours usually despite having a busy work schedule.

HR Lowering springs unused
200

Hasport upper engine mount 70A unused
90

Acuity Short Shifter, Mugen carbon shift knob, Acuity knob
350 for shifter, offer for knobs

RRC intake manifold ported & polished
500

Acuity CAI w/ battery relocate and RBC to stock TB coupler
350

Acuity Fuel Rail
RDX Injectors

100 for rail, 220 for injectors

FR catback
400

Enkei NT03+m 18x7.5 +42 sitting on Michelin PS AS4 225/40/18 at 9/32"
1400


I will need to double check with my tuner if the Hondata licensed custom tune can translate to having a physical device to come with the car. I have some pictures here: Hello 9th gen
 

Attachments

·
Registered
2015 Civic Si Sedan
Joined
·
18 Posts
Discussion Starter · #2 · (Edited)
If parting out...

Local pickup preferable for the wheels. I have all of the OEM items replaced in the list except the exhaust sans muffler section. OEM clutch and flywheel were scrapped due to clutch groan. I would like to have a trade lined up for the downpipe and exhaust system if possible since I only have the muffler.

I also do have a spare set of Truhart shocks and HR lowering springs that I was going to use before deciding on coilovers; and, I have an unused Hasport upper mount 70A.

EDIT:
Shocks are sold
 

·
Registered
2015 Civic Si Sedan
Joined
·
18 Posts
Discussion Starter · #17 ·
RRC, injectors, and fuel rail are currently pending on local sale.
 

·
Registered
2015 Civic Si Sedan
Joined
·
18 Posts
Discussion Starter · #19 ·
Mandatory quarantine delayed part out. RRC, fuel rail, and injectors are spoken for. Cold air intake w/ battery tray is still available as are the downpipe and exhaust. Same goes for the HR lowering springs. Wheels are sold. OP has been updated. Parts are coming off the car around October 1st.
 

·
Registered
2015 Civic Si Sedan
Joined
·
18 Posts
Discussion Starter · #20 ·
RRC, fuel rail, RDX injectors, and cold air intake are available and ready to ship. Catback also ready for sale. I’d prefer to sell the manifold as a set with rail and injectors. Intake will come with three different couplers.
 
1 - 20 of 31 Posts
Status
Not open for further replies.
Top