9th Gen Civic Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
464 Posts
Discussion Starter #1
Alright guys i need instructions on how to install this converter to my Si.. Its a PAC SNI-35 Adjustable Line Output Converter. I need to know which wires go with...well with which wire. Heres a pic... IMAG0704.jpg
 

·
Registered
Joined
·
833 Posts
White: Left(+) speaker
White/Black: Left(-) speaker
Grey: Right(+) speaker
Grey/Black: Right(-) speaker
Question: I do not have any sounds after the converter is wired up and connected to an aftermarket amplifier
Answer: Some amplifiers need to see a reference ground on the RCA inputs. Connect the two brown wires to chassis ground, preferably to the chassis of the stereo. If you do have sound, do not connect the brown wires to ground. The brown wires do not help in removing engine noise.
i took this from their website i assume the wires look more brown than red in person.
 

·
Registered
Joined
·
464 Posts
Discussion Starter #3
alright ill give it a shot, i was thinking somewhere in there the remote wire went connected to it too. Thanks for the help
 
1 - 3 of 3 Posts
Top