9th Gen Civic Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
61 Posts
Discussion Starter · #1 ·
Hi all Ill be posting a video link in here.
Long story short I have a 2013 civic si, and recently bought a stage 4 clutch kit (un-sprung) from Action Clutch.
I babied the car and new clutch for the first 800miles didn't do anything crazy.
But now I am having a issue where when my foot is not on the clutch it will make a whistling noise, sounds like a bird chirping.
here is a video Link:

The mechanic who installed the clutch is telling me it is a bad bearing, and possibly the pressure plate needs to be replaced. I contacted Action Clutch they told me to adjust the pedal which I did and the noise did go away but only for a few days. I haven't even had this clutch in my car for more than 4 months....
Driving it is fine and it goes into gear fine too. Kinda confused. I dont wanna have to buy a another $600 clutch and then pay $700 in labor :(...Just looking for some second opinions.
 

· Registered
Joined
·
640 Posts
Its a steel plate between the oil pan and the transmission. Not sure if it will help seeing the release bearing.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top