Joined
·
693 Posts
I just installed a DDM Tuning Hi and Lo Beam HID Kit on my '12 Si - worked flawlessly at first; low beams are amazing at 8000K. Hi beams worked well for 2 days and then only the right side lit up at 1/4 power. Installed relay harnesses and error code eliminators; I have the hi and low beams on together; when I put on the hi beams, the low beams stay on, too.
Possible questions - too much power draw to light up the high beams when the low beams are already on? I have the 35 watt ballasts installed on both hi and low beams. I heard somewhere that these DDM kits need 80 watts to power up the bulbs and then they reduce to 35 watts running?
Thanks in advance to anyone that knows what is going on with my ride.
Steve
Possible questions - too much power draw to light up the high beams when the low beams are already on? I have the 35 watt ballasts installed on both hi and low beams. I heard somewhere that these DDM kits need 80 watts to power up the bulbs and then they reduce to 35 watts running?
Thanks in advance to anyone that knows what is going on with my ride.
Steve