I just installed the k-tuned short ram 3" intake on my stock 2015 Si coupe. After I started up and tried to take off, it keeps stalling at the beginning. But once I take off and am driving, its fine. Some people have suggested that everything might not be clamped down all the way and that there's air leakage and to check for that. I did, no luck. Some have suggested to disconnect the negative battery terminal so that it will reset the MAP sensor properly, but nothing. I made sure the MAP sensor was plugged in all the way, nothing loose, and everything.
I am starting to suspect that the MAP sensor is the issue. Some have said if its dirty, itll do that. But it was working perfectly fine right before install. I made sure to place it out of the way so that it won't get dirty during install too. Some have suggested that cleaning it will help, and others say that the MAP sensor straight up needs to be replaced. How do I know which route I should take and what the real issue/fix is?
I am starting to suspect that the MAP sensor is the issue. Some have said if its dirty, itll do that. But it was working perfectly fine right before install. I made sure to place it out of the way so that it won't get dirty during install too. Some have suggested that cleaning it will help, and others say that the MAP sensor straight up needs to be replaced. How do I know which route I should take and what the real issue/fix is?