9th Gen Civic Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Just replaced the calipers, pads and rotors on my 2012 ex coupe. Now I've got this metallic scraping noise that's driving me nuts. I lubed the sliders and pad backings. If I jack up the back and spin the wheels, dead silence. It starts at about 15 MPH and disappears over 45 MPH. Definitely not a wheel bearing or bent dust shield. Any thoughts greatly appreciated.
 

·
Registered
Joined
·
63 Posts
Hey Wascly,

Interestingly enough, I had some odd brake noises when I had replaced my brake pads with brembo pads. It turned out that, in my case, it was the brake hardware that was causing the noise. Did you replace this hardware too?
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Thanks for the reply. I did replace all the hardware and greased everything. I've since determined the noise may actually be coming from the front brakes. I'm going to be replacing the pads, rotors and hardware there. It's weird how sounds travel around.
 
1 - 3 of 3 Posts
Top