Will this be fine 17x9 +38. Willing to get Work wheels. I was trying to do 17 x 9 +35 but they dont do it in that size. I am not trying to roll/pull or install camber arms. I am already lowered.
You would be better off in the wheel/tire fitment thread. What vehicle do you have and what tire size do you plan to run? Are you on springs or coilovers, how low are you?
front: 16x8.5 +17 w/ 2 inch lip (-2.4 camber)
rear: 16x8.5 +26 w/ 2 inch lip (-4.3 camber)
I'm on Tein Flex Z. The front has camber plates and camber bolts. The rear has SPC control arms. Tires are 225/50r16 Continental Extremecontact Sport. The 2014-15 Civic SI comes rolled from factory, which is super nice!
front: 16x8.5 +17 w/ 2 inch lip (-2.4 camber)
rear: 16x8.5 +26 w/ 2 inch lip (-4.3 camber)
I'm on Tein Flex Z. The front has camber plates and camber bolts. The rear has SPC control arms. Tires are 225/50r16 Continental Extremecontact Sport. The 2014-15 Civic SI comes rolled from factory, which is super nice!
Advan RZ-II 17x8” et37
Michelin Pilot Sport A/S 3+ 225/45R17
Swift Spec-R lowering springs
Truhart front struts and Koni rear shocks
Buddy Club adjustable rear upper control arms
There's a tiny bit of poke but not much.
JNC 005 18x9 +30 with 20mm spacers all around dropped on Godspeed MonoRS coilovers - no camber kit, rolled and pulled fenders/QP (only the first and second photo have the rears rolled and dropped more once springs finally set in).
Work Kiwami 18x9.5 +38 with Michelin pilot power sport AS/3 in 225/40/18. No major camber adjustments, slight rubbing if I hit a dip or an incline at a corner....other than that nothing else needed.
I wanna start a thread for those people who have a Meaty / Functional set up. POST YOUR PICS!
Example of Meaty / Functional
Examples of fitments that are not Meaty / Functional
Hello, I’m new here. I have a 2014 Civic LX but I have one issue... I do NOT like the steel wheels with hubcaps. I saw the OEM stock aluminum 16” wheels for a 2014 Civic EX and according to eBay where I found them, they will fit. I’m sure they will but what size tires would be best if going on...
I got these jnc005 17x9.5 +32
And my calipers on the front are big so I've been running spacers for just the front. I've looked at a couple pics that were on other civics like mine (2013 si coupe) and they don't look like they're on spacers. Can someone explain to me if that's possible or is it...
I have a 2012 Si HFP, with the 18" wheels on 215/40/18. I bought new summer tires and put about 6000km and started hearing a rumbling noise in the tires, tried rotating them didn't change anything. I took a video that you can hear pretty well, ( IMG_0202 - Streamable ). I am sure it is the tires...
A forum community dedicated to 9th generation Honda Civic owners and enthusiasts. Come join the discussion about performance, tuning, engine swaps, turbos, modifications, troubleshooting, maintenance, and more!
Smokey · updated 
Seaktannyleng · updated 
fg4.pb · updated 
Chasem · updated 
