9th Gen Civic Forum banner

1 - 5 of 5 Posts

·
Registered
2013 Civic Si sedan
Joined
·
5 Posts
Discussion Starter #1
I’m at the hard motion website about to pull the trigger on a Rbc and towards the end there is a option for a RBC thermal gasket is this nesessary? It also does not state what brand it is or anything. Can some one help.
 

·
Registered
2012 CBP FG4
Joined
·
406 Posts
I’m at the hard motion website about to pull the trigger on a Rbc and towards the end there is a option for a RBC thermal gasket is this nesessary? It also does not state what brand it is or anything. Can some one help.
It will help to keep down intake temps by reducing the heat transfer from the block to the intake manifold/runners.

Not necessary, but definitely helpful.
 

·
Registered
2012 CBP FG4
Joined
·
406 Posts
Same. Intake manifold as well as TB. I really think this is what keeps my IAT's in check. Even with the blower I don't seem to go more than 15deg or so over ambient.
 

·
Registered
2015 si sedan : acuity/rbc/rdx/plm/hondata/etunez
Joined
·
397 Posts
wish i did this. for the $50 bucks or whatever it is, may as well when you’re in there.
 
1 - 5 of 5 Posts
Top